An angle valve is a type of plumbing valve designed with an inlet and outlet positioned at an angle, typically 90 degrees to each other. In confined spaces where a straight-line connection is impractical, this configuration makes installation simple. Angle valves are frequently used in home plumbing systems to control the water flow to fixtures like faucets, toilets, and appliances. They offer a practical way to control or turn off the water supply to specific fixtures, which helps with upkeep and repairs. Angle valves, which provide flexibility and functionality in controlling water flow, are crucial parts of effective plumbing installations.
Angle Valve Prices
Angle valve prices depend on their brand and size. Its price ranges from ₱120.00 to ₱250.00.
| Details | Size | Prices |
| Wilcon Depot | 1/2 inch | ₱150.00 |
| Sanwa | 1/2 inch | ₱120.00 |
| Sanwa | 3/4 inch | ₱150.00 |
| American Standard | 1 inch | ₱250.00 |
| KOHLER | 1/2 inch | ₱180.00 |
| KOHLER | 3/4 inch | ₱210.00 |
Advantages of Angle Valve
Space-saving Design – They are perfect for confined spaces behind sinks, toilets, and other fixtures because of their angled configuration, which enables installation in tight spaces where a straight-line connection is not feasible.
Flexibility – Angle valves facilitate an easier connection to supply lines and fixtures at different angles by offering flexibility in the direction of water flow.
Reduced Risk of Leaks – By allowing angled installations, angle valves reduce the strain on plumbing connections and, consequently, the chance of leaks over time.
Disadvantages of Angle Valve
Limited Flow Capacity – Because of their angled design, angle valves may have a slightly lower flow capacity than other types of valves, which may limit the flow of water.
Vulnerability to Damage – Angle valves are more vulnerable to unintentional damage from knocks or impacts due to their angled construction and protruding handle, particularly in high-traffic areas.
Potential for Obstruction – If debris or sediment are not properly maintained, they may accumulate more readily in the angled body of angle valves, which could eventually cause blockages or decreased performance.
Video about Angle Valve
FAQs
Where are angle valves commonly used?
In both residential and commercial plumbing installations, angle valves are frequently used to regulate the water flow to fixtures like faucets, toilets, and appliances. They are especially helpful in areas with limited space, like those behind toilets and sinks.
How do angle valves work?
Angle valves control the amount of water that passes through the valve by opening and closing a valve mechanism with a handle. The water flow is stopped when the handle is turned clockwise, closing the valve. Water can pass through the valve when it is turned counterclockwise.
How do I install or replace an angle valve?
When installing or replacing an angle valve, the water supply should be turned off, the old valve should be disconnected, thread seal tape should be applied to the threaded connections, and a wrench should be used to attach the new valve. To stop leaks, it’s crucial to adhere to the manufacturer’s instructions and make sure the sealing is done correctly.
Can angle valves be used with both hot and cold water?
As long as the materials used in their construction meet the plumbing system’s specifications for pressure and temperature, angle valves can be used with both hot and cold water.
Do angle valves require regular maintenance?
Even though angle valves are generally low-maintenance parts, it’s still necessary to do routine maintenance and inspections to guarantee peak performance and stop problems like corrosion or leaks.